Pair Epson P60II With Pax A920 Pro

NOTE: Not all P60II printers will be compatible, they must say 'Bluetooth' on the white label on the underside of the printer. These instructions are only for the new version of the Ascend Application.

1. With printer off, press and hold both the Power and Feed buttons
2. Hold the feed button for more than one second to enter 'Mode Selection'
3. Press the feed button 4 times for 'Wireless Module Setup' and then hold the Feed button
4. Press the feed button 2 times for 'Bluetooth' and then hold the Feed button
5. Press the feed button 2 times for 'Security' and then hold the Feed button
6. Press the feed button 3 times for 'Security High' and then hold the Feed button
7. Turn the printer off
8. Press and hold both the Power and Feed buttons
9. Press and release the Feed button once
10. In Ascend app, click 3 lines > Printer Setup
11. Change ‘Printer Type’ to Bluetooth
12. Change ‘Paper Width’ to 2-Inch
13. Enter ‘BD_ADDR’ value from ‘Bluetooth Interface’ sheet (Step 7) under ‘Bluetooth Mac Address’ including colons
14. Select ‘Test Print’
15. A pairing request notification will appear, select ‘Pair & Connect’
16. A sheet will print with a ‘PassKey’, ensure that matches the number displayed on the device.
17. Check off ‘Allow access to your contacts and call history’
18. Select Pair