Skip to main content
Pair Epson T20 Station Printer With Pax A920 Pro
- With printer off, hold Bluetooth button on underside of printer and turn on printer. Keep holding until ‘Wireless Module Setup’ sheet prints
- Quickly press Bluetooth button 2 times and then press and hold. You should now be in ‘Bluetooth Setting’
- Quickly press Bluetooth button 3 times and then press and hold. You should now be in ‘Security’
- Quickly press Bluetooth button 3 times and then press and hold. You should now see confirmation ‘Security High is selected.’
- Press and hold Bluetooth button to exit Setup mode
- Press and hold Bluetooth button to print out ‘Bluetooth Interface’ sheet
- In Ascend app, click 3 lines > Printer Setup
- Change ‘Printer Type’ to Bluetooth
- Change ‘Paper Width’ to 3-Inch
- Enter ‘BD_ADDR’ value from ‘Bluetooth Interface’ sheet (Step 7) under ‘Bluetooth Mac Address’ including colons
- Select ‘Test Print’
- A pairing request notification will appear, select ‘Pair & Connect’
- A sheet will print with a ‘PassKey’, ensure that matches the number displayed on the device.
- Check off ‘Allow access to your contacts and call history’
- Select Pair
Comments
0 comments
Please sign in to leave a comment.