How Do I Change Paper On The Pax Device

1. Open the Hatch: Turn the terminal face down. Near the top of the back panel, locate the printer latch or lever and pull it up/out to release the paper cover. 
2. Remove Old Roll: Take out the empty paper core if there is one. 
3. Insert New Paper Roll: Drop the new thermal roll into the compartment. Important: Ensure the paper feeds from underneath the roll (with the loose end pointing outward over the screen) rather than over the top.
4. Feed the Paper: Pull about 1 to 2 inches (2.5 to 5 cm) of paper straight out of the slot. 
5. Close the Lid: Snap the printer hatch firmly shut until you hear it click. 
6. Tear Excess: Hold the loose paper and pull it upward at a 45-degree angle against the built-in serrated edge to tear off the extra.